@echo off
chcp 65001 >nul
:: 提权
%1 mshta vbscript:CreateObject("Shell.Application").ShellExecute("cmd.exe","/c %~s0 ::","","runas",1)(window.close)&&exit cd /d "%~dp0"
setlocal enabledelayedexpansion
mode con cols=100 lines=25


:: 定义颜色（ANSI转义码）
set "green="
set "red="
set "yellow="
set "reset="


:menu
title MainMenu
echo:
echo:
echo:      ______________________________________________________________
echo:
echo:               Network Tool by guoxiang
echo:
echo:           [1] 两路访问           - 内网走有线, 外网走WIFI 
echo:           [2] 帮助			
echo:           [3] 未完待续
echo:           __________________________________________________ 
echo:
echo:           [0] Exit
echo:
echo:      ______________________________________________________________		
echo:

rem set /p sel= Choose a menu option using your keyboard [1,2,3....]

rem echo    Choose a menu option using your keyboard [1,2,3...E,H,0] :

call :colorEcho green " Choose a menu option using your keyboard [1,2,3...E,H,0] :"

choice /C:120 /N
set sel=%errorlevel%

if "%sel%"=="3" exit /b
if "%sel%"=="2" call :PrintInfo & cls & goto :menu
if "%sel%"=="1" call :flow2way & cls & goto :menu


goto menu

:flow2way
cls
route -p ADD 10.0.0.0 MASK 255.0.0.0 10.34.28.1 || call :colorEcho red "添加永久路由失败!" && pause && goto :menu
netsh interface ipv4 show interfaces | find /i "WLAN" >nul
set has_wlan=%errorlevel%
netsh interface ipv4 show interfaces | find /i "以太网" >nul
set has_ethernet=%errorlevel%
set /a logical=%has_wlan%+%has_ethernet%

if %logical% equ 0 (
	echo 正在更改以太网接口的度量值为20....
	netsh interface ipv4 set interface "以太网" metric=20
	echo 正在更改WLAN接口的度量值为10....
	netsh interface ipv4 set interface "WLAN" metric=10
) else (
	echo 需要手动指定网络接口名称^!
	netsh interface ipv4 show interfaces
	echo 请输入有线连接接口名称:
	set /p lowwer_int=
	echo 请输入无线连接接口名称:
	set /p upper_int=
	echo 正在更改%lowwer_int%接口的度量值为20....
	netsh interface ipv4 set interface "%lowwer_int%" metric=20
	echo 正在更改%upper_int%接口的度量值为10....	
	netsh interface ipv4 set interface "%upper_int%" metric=10
)
call :colorEcho green "任务完成!"
echo.

call :colorEcho yellow "Press any key to Go back..."
pause >nul
exit /b



:: 定义函数
:PrintInfo
cls
echo:
echo: ===================================================================================
echo:
echo: [1] 添加永久静态路由:
echo:    route -p ADD 10.0.0.0 MASK 255.0.0.0 10.34.28.1
echo:

echo: [2] 提高无线连接的优先级 ^(设置无线连接的跃点数为10, 有线连接为20^):
echo    netsh interface ipv4 set interface "以太网" metric=20
echo    netsh interface ipv4 set interface "WLAN" metric=10
echo:

echo: [3] 更改无线连接的DNS地址, 与有线连接相同 ^(有弊端, 如果有线断开则无法正常访问网站^):
echo:   DNS1: 10.2.1.72
echo:   DNS2: 10.2.1.175
echo:
echo: ===================================================================================

pause
cls

echo:
echo: ===================================================================================
echo:
echo: 1.显示网络接口信息:
echo:  netsh interface show interface 
echo:

echo: 2.显示网络接口的详细信息:
echo:   netsh interface ipv4 show interfaces
echo:

echo: 3.配置静态 IP 地址:
echo:   netsh interface ip set address name="连接名" static "<ip address> <mask> <gateway>"
echo:

echo: 4.配置动态 IP 地址:
echo:   netsh interface ip set address name="连接名" source=dhcp
echo:

echo: 5.配置静态 DNS 服务器:
echo:   netsh interface ip set dns name="连接名" static "x.x.x.x"
echo:

echo: 6.配置动态 DNS 服务器:
echo:   netsh interface ip set dns name="连接名" source=dhcp
echo:


echo: 7.查看路由表:
echo:    netsh interface ip show route
echo:
echo: ===================================================================================
pause

:colorEcho
rem %1=颜色参数, %2=消息
set "color=!%~1!"
echo %color%%~2%reset%
goto :eof